SKU: UG-KVM-50744

UGreen 2in 1out USB HDMI KVM Switch Box

UGreen USB HDMI KVM switch allow to control up to 2 HDMI enabled host devices (like PC) using only 1 set of keyboard, mouse and monitor. This switch is compatible with HDMI 1.4 and HDCP 1.4, supports resolution up to 4K@30Hz

Out of Stock

2-Port HDMI Switch 4K

The HDMI KVM Switch Box is compatible with HDMI 1.4 and HDCP 1.4 and supports resolution up to 4K@30HZ. Also backwards1080P, 1080i, 720P, 480P, 480i. With advanced ITE66332 HDMI chipset, this switcher support 4K signal up to 5 metres. Transfer video signal and audio signal simultaneously. And support DTS, AC3, DSD 5.1/7.1 etc audio formats. With this HDMI switch, you can enjoy the most luxurious video and audio.

How to Switch Between Two HDMI Input Devices

Press the Switch Button on the KVM box.
Use Keyboard Hotkey--Double click Ctrl Button(or Scroll Button), then click "1" on Numeric Keypad to switch to PC1 or click "2" to PC2.
Auto Scan Switch--Double click Ctrl Button(or Scroll Button), then click "S" to start the Auto Scan Switch Mode. Available to press any button to end it. Besides, you can set up auto-switch timers between 10s and 999s, which is great for surveillance.

Features:

-4K HDMI resolution
-3 switching modes
-2 HDMI switch ports
-1 button switching

Specifications:

-Input: 2x HDMI & 2x USB2.0
-Output: 1x HDMI & 2x USB
-Resolution: 4K@30Hz
-Support HDMI version: 1.4
-Product Size L*W*H: 134*66*26mm

In the Box:

-KVM HDMI switch x 1
-1.5m USB Cable x 2

**Note

Please make sure the HDMI Input Connector 1 and USB B Connector 1 are plugged in the same Host. HDMI IN1 and USB IN1 is corresponding. Do NOT support HDMI IN1 and USB IN2 mixed insertion.
Only support resolution up to 4K@30Hz, not support 4K@60Hz. Please adjust the resolution to a compatible one.
Must use USB cables to connect the HDMI input devices with the USB IN ports of KVM Switch. Otherwise, the switcher may not work normally.
To use Keyboard Hotkey Switching, the keyboard must be connected to the USB 1.1 Type A ports.
Please connect the printer to the USB 2.0 Type A ports. And please install the printer's driver on your computers before using.
To protect the USB KVM Switch against over-current, over-current protection is designed. The max current is 1A. So it is not suggested to use external hard drives with this switcher.